MSI 3000 Master-A4 XGI VOLARI-Z7 VGA driver 188.8.131.520 Specifications: CPU Supports Intel Pentium 4 / Pentium D / Core 2 Duo processors in LGA775 package Supports Intel Hyper-Threading Technology Chipset North Bridge: Intel 3000 South Bridge: Intel ICH7 Main Memory Supports four unbuffered ECC DIMMs of 1.8 Volt DDR2 SDRAM Supports up to 8GB storage capacity Supports dual channel DDR2 533/667 memory interface Slots Three 32-bit/33MHz v2.3 PCI slots (support 3.3V/5V PCI bus interface) One PCI-Express x8 slot (slot to accept this PCIE_2 x8 cards, but run on x4 speed / PCI Express Bus specification v1.0a compliant) One PCI-Express x8 slot (x8 card slot this PCIE_1 accept and run at x8 speed / PCI Express Bus specification v1.0a compliant) HDD Interface Ultra DMA 66/100 IDE controllers integrated in ICH7R - Supports PIO, Bus Master operation modes - Up to two Ultra ATA drives SATA II controller integrated in ICH7R - Up to 300 MB / s data transfer rate - Can connect up to four SATA devices - Supports AHCI controller with SATA RAID 0, RAID SATA RAID 5, RAID SATA 10 and Matrix RAID (ICH7R) Connectors 1 floppy port supports one FDD with 1.44MB 1 PS / 2 keyboard port 1 PS / 2 mouse port 1 serial port & 1 serial header 1 VGA port 1 parallel port supports SPP / EPP / ECP mode 2 RJ-45 ports (with LEDs) 6 USB ports (4 on the front and 2 on back) Onboard graphics XGI Z7 graphics controller Onboard 16MB SDRAM Onboard LAN Intel 82573V / L Gigabit Ethernet Controller - Uses PCI Express x1 interface on ICH7R - Supports 10Mb / s, 100Mb / s and 1000 Mbit / s Power management features Wake up on LAN (WOL), wake up on serial ring, wake on PCI RTC alarm and wake up Wake up on keyboard / mouse / USB from S1 Supports ACPI S1, S4, S5 function System Management SMBus (I2C) - Temperature, voltage and fan monitors - Chassis Intrusion BIOS The mainboard BIOS provides "Plug & Play" BIOS which the peripheral Devices and expansion cards of the board automatically The mainboard provides a Desktop Management Interface (DMI), the Records your mainboard specifications Dimension and mounting ATX form factor: 30.5 cm (L) x 24.4cm (W) 9 mounting holes It is strongly recommended to have the latest driver version available. Do not forget to check with our site as often as possible in order to stay on the latest drivers, software and games booth. Try a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or no longer supported.