You Here : Home > Drivers

iPF760/iPF765 Firmware Ver.1.05 (Firmware Update Tool Ver.3.21) for Mac OS X v10.2-v10.5

OS Support:

Mac OS X v10.2 - v10.5, English edition

The softwares above require the Intel processor or PowerPC of the
Macintosh Series computers.

Interface Connectivity:
The printer and computer where this program is executed must be c


Publisher Old version


March 20 2013


iPF760/iPF765 Firmware Ver.1.05 (Firmware Update Tool Ver.3.21) for Mac OS X v10.2-v10.5


You can use this program to update the printer firmware version.


Modifications from Ver.1.00 to Ver.1.05
1. Enhancement and improvement of HP-GL/2 function have been implemented.
Following setting items have been added to the HP-GL/2 menu on the control panel.
- [Over Size]: Function to print with setting margins
- [Print Centered]: Function to print in the center of media
- [Enlarge/Reduce]: Function to configure the scale factor (25%-400%)
- [Line width correction]: Function to set correction value of line width
(Target line width can be configured with [Pen Setup])
- [Detect image size]: Function to analyze image data and detect image size
Along with the addition of the setting items above, the function of
[Page Size Process 1] and [Page Size Process 2] have been deleted.
2. Fixed the failure that white line appears on the image under a certain condition.
3. Fixed the failure that the printer does not recover normally when recovering from Sleep Mode.
4. Fixed the problem that the community name setting in SNMP setting is not processed correctly.
5. Maximum sleep timer setting has been changed. [240min] --> [210min]


* Before you start the firmware version update program, close any other applications
that are running.

* Before executing the firmware update of a printer connected to the network,
make sure AppleTalk is selected "Active".

* Do not try to use the printer while the firmware version update program is running.
If a print job is executing, cancel the print job or wait for the job to finish
before you execute the version update program.

* Never switch off the target printer while the firmware version update program is running.

* If the firmware version update fails while writing to the flash ROM,
you may not be able to start the printer. In this case,
contact a Canon service center or the dealer where you purchased the printer.


(1) Switch the printer on.
(2) Decompress it on your computer hard disk.
(3) Execute the imagePROGRAF FirmUpdate file.
The imagePROGRAF Firmware Update Tool is installed.
(4) Execute the installed imagePROGRAF Firmware Update Tool.

Related Downloads

  • imagePROGRAF Printer Driver Ver.2.80 for Mac OS X v10.4-10.7
  • imagePROGRAF Printer Driver is the software that prints from English Macintosh's application to Canon imagePROGRAF iPF760/iPF765.Caution:- If you have upgraded your OS, reinstall the printer driver. - After installing this software, install Media...

    Software Tags

    Ipf760/ipf765 Firmware | Ipf760/ipf765 Firmware Ver.1.05 (firmware Update Tool Ver.3.21) For Mac Os X V10.2-v10.5 | Canon Driver

    Size : 16.85 MB